Commercial Tandem Induction Range 10KW | Space-Saving Vertical Cooker for Restaurants

Commercial Tandem Induction Range 10KW

3 working days, transport by air express or sea, Door to Door delivery.

Work Voltage

Single-Phase Three-Phase
120V, 220V 208V/ 240V, 380V, 415V,480V

Global In-Stock + Fast Pickup

US UK Germany France
Italy Spain Belgium Bulgaria

Order the next ship to

the United States
0
0
0
0
Days
0
0
Hrs
0
0
Min
0
0
Sec
EU 8 Countries
0
0
0
0
Days
0
0
Hrs
0
0
Min
0
0
Sec

5-year Warranty | 2-year Free Exchangeable | 1-year Free Return

Commercial Tandem Induction Range 10KW | Space-Saving Vertical Cooker for Restaurants
Commercial Tandem Induction Range 10KW | Space-Saving Vertical Cooker for Restaurants
Commercial Tandem Induction Range 10KW | Space-Saving Vertical Cooker for Restaurants
Commercial Tandem Induction Range 10KW | Space-Saving Vertical Cooker for Restaurants

Commercial Tandem Induction Range, 10KW (SHPT-A V50)

The SHPT-A V50 stacks two 5000W induction zones one behind the other in a 470mm-wide footprint, about 10kW from a unit only 810mm deep and 210mm tall. The tandem layout gives a tight line two full-power burners without the width of a side-by-side range.

Output and Efficiency

Induction sends 90% to 95% of the energy it draws into the pan rather than the surrounding air, where a gas burner converts about 30% to 45%. Two independent zones let one cook boil and simmer at the same time.

  • Zones: 2 x 5000W in a tandem layout.
  • Footprint: 470mm wide, 810mm deep, 210mm tall.
  • Control: separate knob for each zone.

Build and Protection

A 304 stainless steel body carries a tempered glass cooking surface, and a 3D shielding design limits magnetic field leakage around the coils. Each zone drops power when no pan is present.

  • Body: 304 stainless steel.
  • Shielding: 3D design to limit field leakage.
  • Cut-outs: pan detection plus overheat protection.

Warranty: the SHPT-A V50 is covered by a 5-year warranty with a 1-year free-return window.

Where the Tandem Range Fits

Two burners in a 470mm width suit a narrow gap on the line, a prep corner, or a small restaurant that needs full-power searing and a simmer going at once. The 810mm depth fits a standard counter, and heat is instant when a pan is placed.

Cookware and Cleaning

The zones accept flat-bottom pans suited to induction, and the glass surface wipes clean after service. Because the top stays comparatively cool, spills do not bake on.

Availability and Delivery

The SHPT-A V50 is held in stock and normally shipped within 3 working days, by air express or sea, door to door. Check the site supply before fitting.

After-sales: a 1-year free-return window and a 5-year warranty back the unit, and AT Cooker can advise on spares such as the glass, coils, and control board.
SHPT-A V50
Manufacturer AT Cooker
Item No. SHPT-A V50
Maximum Power 5000W × 2
Number of hobs 2 hob
Warranty 2 years/ 5 years
Availability in Stock
Width 470 mm
Depth 810 mm
Height 210 mm
Energy efficiency 95%
Controller Knob switch

Two zones at 5000W each give about 10kW combined. Check the site supply rating before installation.

It is 470mm wide, 810mm deep, and 210mm tall, with the two zones stacked front to back.

Induction puts 90% to 95% of its drawn energy into the pan, while gas converts about 30% to 45%, so less heat is wasted into the kitchen.

A 5-year warranty with a 1-year free-return window.

The unit is held in stock and normally dispatched within 3 working days, by air express or sea, door to door.